72 11 092 Removing and installing or replacing rear left or right seat belts

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove CAPPING
Remove REAR SEAT

Removing left or right automatic reel:

Undo screw (1) from inertia reel unit (2).

Tightening torques 72 11 21AZ .

Remove inertia reel unit (2).

Installation note:

Inertia reel unit (2) is coded against incorrect installation.

Fig 1: Identifying Screw And Inertia Reel Unit

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1).

Tightening torques 72 11 22AZ .

Remove seat belt.

Installation note:

End fitting is encoded to prevent incorrect assembly.

Fig 2: Identifying Belt Feed Cover Screw

Courtesy of BMW OF NORTH AMERICA, INC.