11 44 001 Removing and installing/renewing the oil/water heat exchanger (N47)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove FULL-FLOW OIL FILTER .
Release screws (1).
Remove panel together with heat exchanger (2).
Tightening torque: 11 42 2AZ .
Assemble engine.