11 74 507 Replacing the pressure converters for exhaust turbocharger (N20)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove ACOUSTIC COVER
Disconnect plug connection (1).
Remove vacuum line (OUT).
Unfasten screws (2).
Remove pressure converter (3).
Installation note:
If the pressure converter is renewed, the (VAC) line must be converted.
Reassemble the vehicle.
Check function of DME.