343050 - Holding sleeve Mechanical tool

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2017 BMW M6, 2017 BMW 650i xDrive, 2017 BMW 650i, 2017 BMW 640i xDrive, and 2017 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: (Assembly sleeve) with a diameter of 22 mm to insert piston and sleeve into the tandem brake master cylinder

Fig 1: Identifying Holding Sleeve (343050)

Courtesy of BMW OF NORTH AMERICA, INC.