11 36 Variable camshaft control
WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2017 BMW M6, 2017 BMW 650i xDrive, 2017 BMW 650i, 2017 BMW 640i xDrive, and 2017 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - VARIABLE CAMSHAFT CONTROL
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | VANOS gear to inlet and outlet camshafts (contact surface on screw head must be greased with ASSEMBLY PASTE 4.4 ) | S63T 0 | M10x1 | Replace screw. | |
| Jointing torque | 30 Nm | ||||
| Angle of rotation | 90 ° | ||||
| 2AZ | Non-return valve VANOS to cylinder head | S63T 0 | M14 x 1.5 | 20 Nm | |
| 3AZ | Solenoid valve holder to cylinder head | S63T 0 | M6 | 10 Nm | |