11 13 Oil sump
WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2017 BMW M6, 2017 BMW 650i xDrive, 2017 BMW 650i, 2017 BMW 640i xDrive, and 2017 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - OIL SUMP
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Oil drain plug | N63 | M18 x 1.5 | Replace sealing ring | 40 Nm |
| 2AZ | Oil sump upper part to crankcase | N63 | M8 | Replace microencapsulated screws | 27 Nm |
| 3AZ | Oil sump bottom section to oil sump upper part | N63 | M8 | Replace microencapsulated screws | 27 Nm |
| 4AZ | Oil deflector to oil sump upper part | N63 | M6 | 10 Nm | |
| 5AZ | Screw plug, oil channel, to oil sump upper part | N63 | M24x1.5 | Replace sealing ring | 50 Nm |
| 6AZ | Oil condition sensor to oil sump bottom section | N63 | M6 | Replace O-ring | 8.5 Nm |