11 11 Engine block
WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2017 BMW M6, 2017 BMW 650i xDrive, 2017 BMW 650i, 2017 BMW 640i xDrive, and 2017 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - ENGINE BLOCK
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Bearing cap to crankcase (ASA collar bolt) | N63 O1 | M11x99 | Replace bolts, screw in hand-tight | |
| Jointing torque | 20 Nm | ||||
| Angle of rotation | 115 ° | ||||
| 2AZ | Bearing cap to crankcase (ASA collar bolt 10.9) | N63 O1 | M8x70 | Replace screws. | |
| Jointing torque | 10 Nm | ||||
| Angle of rotation | 55 ° | ||||
| 3AZ | Threaded support sleeves | N63 O1 | Jointing torque | 6 Nm | |
| 4AZ | Angled screw connection to crankcase | N63 O1 | M8x37 | Flanged head screw 10.9 | |
| Jointing torque | 10 Nm | ||||
| Angle of rotation | 45 ° | ||||
| 5AZ | Screw plug, gutter strip | N63 O1 | M14x1.5 | Replace gasket. | 25 Nm |
| 6AZ | Screw plug, main oil gallery rear and in V-space right | N63 O1 | M18x1.5 | Replace gasket. | 25 Nm |
| 7AZ | Oil nozzle to crankcase | N63 O1 | M12x1 | 10 Nm | |
| 8AZ | Special tool to crankcase | N63 O1 | M8x35 | 20 Nm | |
| 9AZ | Special tool to crankcase | N63 O1 | M10x35 | 40 Nm | |
| 10AZ | Special tool 11 8 930 to special tool 00 2 300 | N63 O1 | M14x35 | 160 Nm | |