11 24 Connecting Rods and Bearings
WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2017 BMW M6, 2017 BMW 650i xDrive, 2017 BMW 650i, 2017 BMW 640i xDrive, and 2017 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - CONNECTING RODS AND BEARINGS
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Connecting rod bolt (new connecting rod with new connecting rod bolts) | S63T 0 | M9x1.25 | Release screws. Suction off crack surfaces. |
|
| 1. Jointing torque | 5 Nm | ||||
| 2. Jointing torque | 20 Nm | ||||
| 3. Jointing torque | 30 Nm | ||||
| 3. Angle of rotation | 75 ° | ||||
| 2AZ | 1. Special screw connection only with new connecting rod bolts. | S63T 0 | M9x1.25 | ||
| 1. Jointing torque | 5 Nm | ||||
| 2. Jointing torque | 20 Nm | ||||
| 3. Jointing torque | 30 Nm | ||||
| 4. Angle of rotation | 75 ° | ||||
| 2. Loosen screws | 5. Loosen screw. | 180 ° | |||
| 6. Jointing torque | 5 Nm | ||||
| 7. Jointing torque | 20 Nm | ||||
| 8. Jointing torque | 30 Nm | ||||
| 9. Angle of rotation | 75 ° | ||||
| 3. Loosen screws | 10. Loosen screw. | 180 ° | |||
| 11. Jointing torque | 5 Nm | ||||
| 12. Jointing torque | 20 Nm | ||||
| 13. Jointing torque | 30 Nm | ||||
| 14. Angle of rotation | 75 ° | ||||
| 4. Loosen screws | 15. Loosen screw. | ||||
| 16. Jointing torque | 5 Nm | ||||
| 17. Jointing torque | 20 Nm | ||||
| 18. Jointing torque | 30 Nm | ||||
| 19. Angle of rotation | 75 ° | ||||