25 11 235 Replacing bearing bushes for gearshift arm
WARNING: This page is about a different car, the 2015 BMW M6, 2014 BMW M6, 2013 BMW M6, and 2012 BMW 650i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary work:
- Remove GEARSHIFT ARM
- Press out bearing bush (1).
- Coat new bearing bush with Circolight (sourcing reference: BMW Parts Department).
- Press the gearshift arm in until the side face of the bearing bush protrudes evenly.
NOTE:
Illustration shows: Gearshift arm simply supported.