25 11 071 Replacing gearshift lever knob

WARNING: This page is about a different car, the 2015 BMW M6, 2014 BMW M6, 2013 BMW M6, and 2012 BMW 650i. However, it is still accessible from the selected car via links, so may be relevant.

Pull installation frame of gaiter at the sides upwards out of center console.

IMPORTANT: Do not use a tool, as this would damage the installation frame or the center console.

Fig 1: Pulling Installation Frame Of Gaiter Out Of Center Console

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Do not twist knob during removal as this would cause the anti-twist lock in the knob to shear off.

Tug firmly to remove button.

Installation note:

Fit knob on gearshift lever, align and press on until it snaps noticeably into place.

Fig 2: Identifying Knob On Gearshift Lever

Courtesy of BMW OF NORTH AMERICA, INC.