41 62 Rear lid
WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2017 BMW M6, 2017 BMW 650i xDrive, 2017 BMW 650i, 2017 BMW 640i xDrive, and 2017 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - REAR LID
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Tailgate to tailgate hinge | F01/F02/F03/F04/F10/F12/F13/F06 | M8x19.5 8.8 | 18.5 Nm | |
| F11 | ISA M8x22 | 18.5 Nm | |||
| F07 | M8 countersunk screw | 18.5 Nm | |||
| F07 | M10 x 34 | 36 Nm | |||
| 2AZ | Tailgate hinge to body | F01/F02/F03/F04/F10/F12/F13/F06 | nut M8 | 18.5 Nm | |
| F07 | M8 x 20 | 18.5 Nm | |||
| F11 | ISA M8x22 | 27 Nm | |||
| F11 | ISA M6x12 | 10 Nm | |||
| 2AZ | Holder to hinge | F12 | M6x12 | 7.6 Nm | |
| 2AZ | Hinge holder to body | F12 | M8x16 | 18.5 Nm | |
| 3AZ | Hinge bolt | F01/F02/F03/F04/F10/F13/F06 | nut M8 | 18.5 Nm | |
| 4AZ | Tailgate lower section to hinge | F07 | M8 x 17 | 18.5 Nm | |
| 5AZ | Tailgate lower section hinge to tailgate | F07 | nut M8 | 18.5 Nm | |
| 6AZ | Limit position, tailgate to body | F07 | M6 x 21 | 6 Nm | |
| F07 | nutM6 | 6 Nm | |||
| F07 | M12x1.5 | 16 Nm | |||
| 7AZ | Ball pin for gas pressure spring to body | F07 | M10 | 36 Nm | |
| 8AZ | Earth cable to hinge | F12 | M6 | 8 Nm | |