22 32 055 Removing and installing/replacing gearbox bearing block (N55)
WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2017 BMW M6, 2017 BMW 650i xDrive, 2017 BMW 650i, 2017 BMW 640i xDrive, and 2017 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.
Remove RUBBER MOUNTS FOR GEARBOX MOUNTING .
Release screw (1) and remove earth cable (2).
Release screws (3).
Remove transmission mounting bracket from transmission.
Installation note:
Tightening torque 22 32 1AZ .