22 11 100 Replacing right engine support arm (N63)
WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2017 BMW M6, 2017 BMW 650i xDrive, 2017 BMW 650i, 2017 BMW 640i xDrive, and 2017 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Secure engine in INSTALLATION POSITION
- Remove rear UNDERBODY PROTECTION .
- Lower FRONT AXLE SUPPORT (right-hand drive models only)
Release screw (1).
Tightening torque 22 11 2AZ .
IMPORTANT:
Installation note:
To ensure play between engine mount and engine support arm, lower the engine completely before tightening the screw connection (engine mount/engine support arm).
To ensure play between engine mount and engine support arm, lower the engine completely before tightening the screw connection (engine mount/engine support arm).
Release screws (1).
Tightening torque 22 11 3AZ .
Remove engine support arm.