51 71 Gaskets and loose body components
WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2017 BMW M6, 2017 BMW 650i xDrive, 2017 BMW 650i, 2017 BMW 640i xDrive, and 2017 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - GASKETS AND LOOSE BODY COMPONENTS
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Rear spoiler | F01/F02/F04/F07 | Screw | 2 Nm | |
| Nut | 8 Nm | ||||
| F11 | M8 | 8 Nm | |||
| F15/F85 | 6 Nm | ||||
| F31 | 1.9 Nm | ||||
| F45/F46 | Screw | 3.1 Nm | |||
| 2AZ | Gasket to tailgate | F11 | 1.5 Nm | ||
| 3AZ | Bulkhead upper part | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | Renew screws (Oval-head screw) |
5 Nm | |
| 4AZ | Trim panel for cover on side member | F06/F12/F13 | 10 Nm | ||
| 5AZ | Stiffening plate to luggage compartment floor | F34 | M8 | 19 Nm | |
| 6AZ | Spoiler module to tailgate | F34 | 2.5 Nm | ||
| 7AZ | Spoiler cover to retaining bracket | F34 | 8 Nm | ||
| 8AZ | Retaining bracket of spoiler cover to spoiler module | F34 | 8 Nm | ||
| 9AZ | Cross-strut to body | F15/F85 | Renew screws | ||
| Jointing torque | 10 Nm | ||||
| Angle of rotation | 90 ° | ||||
| 10AZ | Support part for entrance to body | F15/F16/F85/F86 | 10 Nm | ||
| 11AZ | Torsion cover to body | F33/F83 | Screw | 28 Nm | |
| Nut | 30 Nm | ||||
| 12AZ | Air duct to deformation element/cross connection | F45/F46 | Screw | 6 Nm | |
| 13AZ | V-support to support/cross connection | F45/F46 | Screw | 12 Nm | |
| 14AZ | Vertical connection to deformation element | F45/F46 | Screw | 12 Nm | |
| 15AZ | Rear spoiler lower section to tailgate, top | F45 | Screw | 8 Nm | |
| 16AZ | Rear spoiler lower section to tailgate, side | F45 | Screw | 4.5 Nm | |
| 17AZ | Bulkhead cover, top | F45/F46 | Screw | 3.0 Nm | |
| 18AZ | Side trim on tailgate | F46 | Screw | 2.7 Nm | |