51 11 Front bumper
WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2017 BMW M6, 2017 BMW 650i xDrive, 2017 BMW 650i, 2017 BMW 640i xDrive, and 2017 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - FRONT BUMPER
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Bumper to air duct, top | F01/F02/F03/F04/F06/F07/F10/F11/F18 | 4 Nm | ||
| 2AZ | Deformation element, top or bottom, to vertical connection | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | 11.8 Nm | ||
| 3AZ | Deformation element to engine support | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18/F25/F26 | M12 | Replace screws | |
| Jointing torque | 80 Nm | ||||
| Angle of rotation | 270 ° | ||||
| 4AZ | Support to deformation element | F01/F02/F03/F04/F06/F07/F10/F11/F18/F12/F13 | Replace screws and nuts | 27 Nm | |
| F25/F26 | M8 | 20 Nm | |||
| 5AZ | Carrier to deformation element, bottom | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | 11.8 Nm | ||
| 6AZ | Deformation element, bottom, to adapter plate, front axle carrier | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | 19 Nm | ||
| 7AZ | V-support to deformation element, top | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | 19 Nm | ||
| 8AZ | Car registration number to bumper | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | 1 Nm | ||
| 9AZ | Car registration number to bumper (thread repair) | F01/F02/F03/F04/F07/F10/F11/F12/F13/F18 | M5 | 4.5 Nm | |
| 10AZ | Carrier, bottom, to deformation element, bottom | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | 11.8 Nm | ||
| 11AZ | Bumper to side wall | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | 3 Nm | ||
| 12AZ | Bumper to radiator air duct | F25/F26 | 5 Nm | ||