34 32 Brake Lines
WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2017 BMW M6, 2017 BMW 650i xDrive, 2017 BMW 650i, 2017 BMW 640i xDrive, and 2017 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - BRAKE LINES
| Type | Thread | Tightening specifications | Value | ||
|---|---|---|---|---|---|
| 1AZ | Brake line screws/retaining screws | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | M12 x 1 | 14 Nm | |
| F01/F02/F03/F04/F06/F07/F10/F11/F13/F12/F18/F25/F26 | M12 x 1 | Blue union screw connection in steel e.g. brake hose | 16 Nm | ||
| F01/F02/F03/F04/F06/F07/F11/F10/F12/F13/F18/F25/F26 | M12 x 1 | Blue union screw connection in aluminium e.g. hydraulic control unit | 17 Nm | ||
| F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | M10 x 1 | 14 Nm | |||
| F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18/F25/F26 | M10 x 1 | Blue union screw connection in steel e.g. brake hose | 16 Nm | ||
| F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18/F25/F26 | M10 x 1 | Blue union screw connection in aluminium e.g. hydraulic control unit | 17 Nm | ||
| 2AZ | Brake hose to brake caliper, front | F01/F02/F03/F04/F03/F06/F07/F10/F11/F12/F13/F18/F25/F26 | Cap screw | 17 Nm | |
| 3AZ | Brake hose to brake caliper, rear | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18/F25/F26 | 24 Nm | ||
| F10/F12/F13/M5/M6 | M10x1 | Banjo bolt (renew seals) | 40 Nm | ||