232050 - Puller AM

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2017 BMW M6, 2017 BMW 650i xDrive, 2017 BMW 650i, 2017 BMW 640i xDrive, and 2017 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: (Rillex ball bearing puller 6205) For pulling out the grooved ball bearing from the transmission countershaft and the transmission output shaft

Consisting of:

0491550 Claw
NOTE: (Claw for Rillex 6305 (8 pieces))

Fig 1: Identifying Puller (232050)
Courtesy of BMW OF NORTH AMERICA, INC.
0491551 Holding sleeve
NOTE: (Union sleeve)
0491552 Spindle
NOTE: (Pressure spindle)