232020 - Puller AM

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2017 BMW M6, 2017 BMW 650i xDrive, 2017 BMW 650i, 2017 BMW 640i xDrive, and 2017 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: (Rillex ball bearing puller) 7 balls - For pulling out the grooved ball bearing of the transmission drive shaft

Consisting of:

0491545 Claw
NOTE: (Claw for Rillex (7 pieces))
0491546 Holding sleeve
NOTE: (Union sleeve)
0491547 Spindle
NOTE: (Pressure spindle)

Fig 1: Identifying Puller (232020)
Courtesy of BMW OF NORTH AMERICA, INC.