232000 - Puller AM

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2017 BMW M6, 2017 BMW 650i xDrive, 2017 BMW 650i, 2017 BMW 640i xDrive, and 2017 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: (Rillex ball-bearing extractor 6206) 9 ball bearings with steel cage - For pulling out the grooved ball bearing of the transmission drive shaft

Consisting of:

0491537 Claw
NOTE: (Claw for Rillex 6206 (9 x))
0491538 Holding sleeve
NOTE: (Union sleeve)
0491539 Spindle
NOTE: (Pressure spindle)

Fig 1: Identifying Puller (232000)
Courtesy of BMW OF NORTH AMERICA, INC.