23 00 Transmission in general (GS6-53BZ)
WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2017 BMW M6, 2017 BMW 650i xDrive, 2017 BMW 650i, 2017 BMW 640i xDrive, and 2017 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - TRANSMISSION IN GENERAL
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| TRANSMISSION DESIGNATIONS, SEE 23... | |||||
| 1AZ | Transmission to engine (Aluminum screws/bolts are not magnetic). | Replace aluminum screws/bolts. Jointing torque and angle of rotation must be observed without fail |
|||
| N53/N55 | M12 | Jointing torque | 25 Nm | ||
| Angle of rotation | 130 ° +20 ° | ||||
| M10X85 | Jointing torque | 20 Nm | |||
| Angle of rotation | 180°- 200 ° | ||||
| N53/N55 | M8 | Steel screw | 19 Nm | ||
| N53/N55 | M12 | Steel screw | 66 Nm | ||
| K transmission | M8 | Steel screw | 19 Nm | ||
| K transmission | M12 | Steel screw | 66 Nm | ||
| I-transmissionN13 | M10 | Steel screw | 38 Nm | ||
| I-transmissionN20 | M10 | Steel screw | 56 Nm | ||
| 2AZ | Oil drain plug/oil filler plug | H/G-transmission | M18x1.5 hexagon socket | 35 Nm | |
| H/I transmission | M12x1.5 | 25 Nm | |||
| I-transmission | M18x1.5 | Steel screw without seal | 45 Nm | ||
| K transmission | Hexagon socket | 40 Nm | |||