23 00 Transmission in general (GS6-53BZ) (S63/N63)
WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2017 BMW M6, 2017 BMW 650i xDrive, 2017 BMW 650i, 2017 BMW 640i xDrive, and 2017 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - TRANSMISSION IN GENERAL
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Transmission to engine TRANSMISSION DESIGNATIONS, SEE 23... | ||||
| Hex screws | B/C/D/E/F/G/H/I/7-speed SMG | M6 | 8 Nm | ||
| B/C/D/E/F/G/H/I/7-speed SMG | M8 | 25 Nm | |||
| B/C/D/E/F/G/H/I/7-speed SMG | M10 | 49 Nm | |||
| B/C/D/E/F/G/H/I/7-speed SMG | M12 | 74 Nm | |||
| Torx bolt | B/C/D/E/F/G/H/I/7-speed SMG | M6 | 9 Nm | ||
| B/C/D/E/F/7-speed SMG | M8 | 19 Nm | |||
| B/C/D/E/H/I/7-speed SMG | M10 | 43 Nm | |||
| G-transmission | M10 | 38 Nm | |||
| 7-speed SMG | M10x55 8.8 | 43 Nm | |||
| 7-speed SMG | M10x42 8.8 | 42 Nm | |||
| Steel screws with Torx head | I/G/H/K transmission | M8 | 19 Nm | ||
| Steel screws with Torx head | I/G/H/K transmission | M12 | 66 Nm | ||
| 2AZ | Transmission to engine N52/N52K/N53/N54/N55 Aluminum screws/bolts are not magnetic. |
I/G/H-transmission | Replace screws Jointing torque and angle of rotation must be observed without fail | ||
| I/G/H-transmission | M10x30 | Jointing torque | 20 Nm | ||
| Angle of rotation | 90-110° | ||||
| I/G/H-transmission | M10x85 | Jointing torque | 20 Nm | ||
| Angle of rotation | 180-200° | ||||
| I/G/H/K transmission | M12 | Jointing torque | 25 Nm | ||
| Angle of rotation | 130 ° +20° | ||||
| 3AZ | Cover plate, transmission | I/H-transmission | M6 | 8 Nm | |