23 11 Housing with lid
WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2017 BMW M6, 2017 BMW 650i xDrive, 2017 BMW 650i, 2017 BMW 640i xDrive, and 2017 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - HOUSING WITH LID
| TRANSMISSION DESIGNATION | Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|---|
| 1AZ | Transmission housing, rear section/front section | B/C/D/E/F/G/H/I/7-speed SMG | 22 Nm | ||
| 2AZ | Cover with guide tube/transmission case | B/C/D/E/F/G/H/I/C/7-speed SMG | M8 x 22 | 18 Nm | |
| B/C/D/E/F/G/H/I/C/7-speed SMG | M8 x 30 | 25 Nm | |||
| B/C/D/E/F/G/H/I/C/7-speed SMG | M6 | 10 Nm | |||
| 3AZ | Bearing cap/sealing flange | B/C/D/E/F/G/H/I/7-speed SMG | 10.5 Nm | ||
| 4AZ | Reverse gear wheel axle to intermediate housing | B/C/D/E/F/G/H/I/7-speed SMG | 49 Nm | ||
| 5AZ | Retaining plate for reverse gear wheel axle to intermediate case | B/C/D/E/F/G/H/I/7-speed SMG | 25 Nm | ||
| 6AZ | Transmission closing plate | B/C/D/E/F/G/H/I/7-speed SMG | M6 | 8 Nm | |
| 7AZ | Transmission oil strainer in transmission | G-transmission | M18 | 25 Nm | |