23 11 614 Replacing guide tube for clutch operator (GS6-53BZ) N63/S63
WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2017 BMW M6, 2017 BMW 650i xDrive, 2017 BMW 650i, 2017 BMW 640i xDrive, and 2017 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
(gearbox removed)
Necessary preliminary tasks:
- Remove CLUTCH RELEASE BEARING AND RELEASE LEVER from guide tube
Release screws.
Remove guide tube (1).
IMPORTANT:
Guide tube is coated with Teflon and must not
be greased.
Installation note:
Clean thread.
Install screws with Loctite 243.
Tightening torque 23 11 2AZ .
NOTE:
Remove sticker (1) and adhesive with a suitable solvent.