31 60 Output shaft
WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2017 BMW M6, 2017 BMW 650i xDrive, 2017 BMW 650i, 2017 BMW 640i xDrive, and 2017 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - OUTPUT SHAFT
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Output shaft console to engine oil sump | F01/F02/F06/F07/F10/F11/F12/F13/F25/F26 | M8 | 19 Nm | |
| 2AZ | Output shaft to wheel hub | F01/F02/F06/F07/F10/F11/F12/F13/F25/F26 | M16 | Observe instructions in Repair Manual. Replace collar bolt and spring. |
|
| Jointing torque | 210 Nm | ||||
| Angle of rotation | 90 ° | ||||