32 41 105 Removing and installing/replacing belt pulley for hydraulic pump
WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2017 BMW M6, 2017 BMW 650i xDrive, 2017 BMW 650i, 2017 BMW 640i xDrive, and 2017 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Carry out preliminary work as described in the document "Replacing drive belt
". See 11 28 010 REPLACING DRIVE BELT FOR ALTERNATOR (N63)
or 11 28 010 REPLACING DRIVE BELT FOR ALTERNATOR (N55)
.
Slacken screws (1)
Relieve tension on drive belt and remove from belt pulley (2). See 11 28 010 REPLACING DRIVE BELT FOR ALTERNATOR (N63) or 11 28 010 REPLACING DRIVE BELT FOR ALTERNATOR (N55) .
Unscrew bolts (1) and remove belt pulley (2).
Installation note:
Lettering on belt pulley (2) must point forwards.
Replace microencapsulated screws.
Tightening torque 32 41 2AZ/4AZ .