00 00... Microencapsulated screws
WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2017 BMW M6, 2017 BMW 650i xDrive, 2017 BMW 650i, 2017 BMW 640i xDrive, and 2017 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.
Screw securing adhesive is a means of preventing a screwed connection from being loosened by external influences.
Once the screw has been coated with adhesive, the adhesive remains inactive until such time that it is activated by the encapsulation breaking when the screw is inserted and then cures (hardens) at room temperature.
Installation note:
- Screw connection must be completed within 20 mins. (start of curing)
- Microencapsulated screws must not be retightened
- Thread of nut must be cleaned beforehand in event of repeated use