00 00... Body: Check for corrosion (except cavities)

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2017 BMW M6, 2017 BMW 650i xDrive, 2017 BMW 650i, 2017 BMW 640i xDrive, and 2017 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

Visually inspect underbody and add-on parts (brake lines, exhaust branch, sills) for corrosion and check for damage.
Check wheel arches for corrosion.
Open doors and check A-, B- and C-pillars for corrosion, especially door hinges.
Check door window frame for corrosion, folding back door seal slightly if necessary.
Check outer body for stone chipping, scratches or damage to paintwork and associated corrosion.

IMPORTANT: If damage to the underbody is identified:

If necessary, remove trim panels from underbody.
Check bracket as well as brake- and fuel lines for damage, corrosion and correct installation position.

Rectify identified faults after consulting with customer and issue a separate invoice.