17 13 030 Removing and installing/replacing coolant filler neck (N63)

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2017 BMW M6, 2017 BMW 650i xDrive, 2017 BMW 650i, 2017 BMW 640i xDrive, and 2017 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Drain COOLANT .
Remove ACOUSTIC INSULATION for bulkhead on left
Remove front left WHEEL ARCH COVER

Release screws (1).

Fig 1: Identifying Screws Of Coolant Filler Neck

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock and detach coolant hoses (1) on coolant filler neck.

Fig 2: Identifying Coolant Hoses

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock and detach coolant hoses (1) on coolant filler neck.

Weave out and remove coolant filler neck.

Fig 3: Identifying Coolant Hoses On Coolant Filler Neck

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.

Top up COOLANT .

Visual inspection of cooling system for tightness.