17 11 100 Removing and installing/replacing the coolant expansion tank (N63O1)

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2017 BMW M6, 2017 BMW 650i xDrive, 2017 BMW 650i, 2017 BMW 640i xDrive, and 2017 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Drain COOLANT .
Remove WHEEL ARCH COVER (REAR SECTION) front left

Release screws (1).

Tightening torque 17 10 2AZ .

Unlock connector (2) on coolant level switch and disconnect.

Fig 1: Identifying Connector On Coolant Level Switch And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Pull expansion tank (1) forward.

Release and disconnect coolant hoses (2).

Release and disconnect coolant hoses (3).

Feed out expansion tank (1) toward the front and remove.

Fig 2: Removing Expansion Tank

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.

Top up COOLANT .

Check cooling system for LEAKS .