65 75 055 Removing and installing/replacing emergency power siren with tilt sensor

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2017 BMW M6, 2017 BMW 650i xDrive, 2017 BMW 650i, 2017 BMW 640i xDrive, and 2017 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary work:

Remove GUIDE FOR BUMPER AT REAR RIGHT

Secure guide for bumper (3) against falling out.

Unfasten plug connection (1) and disconnect.

Slacken nut (2).

Fig 1: Identifying Bumper Guide, Plug Connection And Nut

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock catch (1).

Remove emergency power siren (2) from guide for bumper (3).

Catch (1) must not be damaged.

Make sure emergency power siren (2) is correctly seated on guide for bumper (3).

Fig 2: Identifying Emergency Power Siren, Bumper Guide And Catch

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out VEHICLE PROGRAMMING/ENCODING .