LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3802 (Engine Electrical System - Repair - F13) >> Engine Wiring Loom >> 12 51 300 Removing and installing/replacing engine wiring harness section, ignition module cylinder 1-4 (N63) >> 13..... Remove the intake port (N63 B40/B44 O 1)

13..... Remove the intake port (N63 B40/B44 O 1)

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2017 BMW M6, 2017 BMW 650i xDrive, 2017 BMW 650i, 2017 BMW 640i xDrive, and 2017 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks: 

- Remove TRAILING LINKS on left and right

Picture describes the left side, the procedure for the right side is identical.

Press in latch mechanism (1).

Feed out intake duct (2) towards top.

Fig 1: Pressing-In Latch Mechanism And Feeding-Out Intake Duct Toward Top
G00554312Courtesy of BMW OF NORTH AMERICA, INC.

Press in latch mechanism (1).

Detach intake port (2) towards rear and remove.

Fig 2: Detaching Intake Duct Toward Rear
G09919875Courtesy of BMW OF NORTH AMERICA, INC.