LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3802 (Engine Electrical System - Repair - F13) >> Electronic Switching Or Control Units >> 12 14 550 Replacing control unit (DME) (N63) >> 13...... Removing intake duct (N63)

13...... Removing intake duct (N63)

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2017 BMW M6, 2017 BMW 650i xDrive, 2017 BMW 650i, 2017 BMW 640i xDrive, and 2017 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:  Remove TENSION STRUTS on left and right

NOTE: Picture describes the left side, the procedure for the right side is identical.

Press in catch (1).

Feed out intake duct (2) towards top.

Fig 1: Identifying Catch And Intake Duct
G00532893Courtesy of BMW OF NORTH AMERICA, INC.

Press in catch (1).

Detach intake duct (2) towards rear and remove.

Fig 2: Detaching Intake Duct Toward Rear
G00532617Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals