LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3801 (Heating And Air Conditioning - Repair - F13) >> Heater With Operation >> 64 11 906 Removing and installing/renewing ventilation temperature sensor (center fresh air grille)

64 11 906 Removing and installing/renewing ventilation temperature sensor (center fresh air grille)

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2017 BMW M6, 2017 BMW 650i xDrive, 2017 BMW 650i, 2017 BMW 640i xDrive, and 2017 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks: 

Disconnect plug connection (1).

Turn temperature sensor (2) on plug socket in direction of arrow up to limit position.

Remove temperature sensor (2) from center fresh air grille (3).

Installation note: 

Pay attention to lead sequence.

Make sure temperature sensor (2) is correctly engaged in middle fresh air grille (3).

Fig 1: Removing Temperature Sensor From Center Fresh Air Grille
G06886163Courtesy of BMW OF NORTH AMERICA, INC.