64 11 326 Replacing the button caps of the heating and air conditioning system control panel

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2017 BMW M6, 2017 BMW 650i xDrive, 2017 BMW 650i, 2017 BMW 640i xDrive, and 2017 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 340

Tape area (1) around the button caps with adhesive tape.

Fig 1: Identifying Tape Area Around Button Caps

G09929359

Courtesy of BMW OF NORTH AMERICA, INC.

Press blower rocker switch (1) on one side and pry it off on the other side with special tool 00 9 340 .

Fig 2: Pressing Blower Rocker Switch

G09929360

Courtesy of BMW OF NORTH AMERICA, INC.

Pry off remaining button caps (1) with special tool 00 9 340 .

Fig 3: Removing Button Caps Using Special Tool 00 9 340

G09929361

Courtesy of BMW OF NORTH AMERICA, INC.

Clip in button caps (1) into operating unit.

Remove adhesive tape.

Fig 4: Clipping Button Caps Into Operating Unit

G09929362

Courtesy of BMW OF NORTH AMERICA, INC.

Check function of the air conditioning.