51 45... Removing and installing/replacing side panel on dashboard on left or right

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2017 BMW M6, 2017 BMW 650i xDrive, 2017 BMW 650i, 2017 BMW 640i xDrive, and 2017 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 325

When working on trim panel components, make sure that visible surfaces are not scratched or damaged (e.g. by sharp-edged tools).

Pull off sealing (1) in the area of the dashboard side panel (2).

Unclip side panel from dashboard (2) in direction of arrow with special tool 00 9 325 and feed out at a slant to the rear.

Fig 1: Identifying Dashboard Side Panel And Sealing

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Retaining clips (2) and guide tab (3) of side panel on dashboard (1) must not be damaged or missing.

Replacement

Modify retaining clips (2).

Fig 2: Identifying Dashboard Side Panel, Retaining Clips, And Guide Tab

Courtesy of BMW OF NORTH AMERICA, INC.