65 77 720 Removing and installing (replacing) left B-pillar sensor

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: NOTE AIRBAG SAFETY INSTRUCTIONS !
Incorrect handling can lead to airbag deployment and cause injury.

Necessary preliminary work:

Disconnect BATTERY CABLE
Remove REAR SEAT

Release screw.

Tightening torque 65 77 3AZ .

Feed out the B-pillar sensor (1) downwards.

Unfasten plug connection (2) and disconnect.

Installation note:

Make sure sensor is mounted without play.

Fig 1: Locating B-Pillar Sensor Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.