72 00... Replacing the seat belt clip

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 5 040

NOTE: If the position of the seat belt clip (1) cannot be identified, the position of the seat belt clip on the opposite side of the vehicle is used.

Insert the seat belt clip (1) in the previous position on the seat belt (2).

Fig 1: Identifying Seat Belt Clip

Courtesy of BMW OF NORTH AMERICA, INC.

Mount the counterpiece (1).

Press the seat belt clip with special tool 00 5 040 .

Check that the seat belt clip and counterpiece (1) are firmly seated.

NOTE: If the seat belt clip is pressed too firmly, the counterpiece may loosen (1).

Fig 2: Pressing Seat Belt Clip Using Special Tool 00 5 040

Courtesy of BMW OF NORTH AMERICA, INC.