66 20 515 Removing and installing/replacing an ultrasonic sensor at front left (S63)
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove front bumper panel. See 51 11 156 REMOVING AND INSTALLING (REPLACING) FRONT BUMPER PANEL .
Unfasten plug connection (1) and disconnect.
Unclip ultrasonic sensor (2) from retaining tabs.
Installation note:
Retaining tabs must not be damaged.
Make sure ultrasonic transducer (2) is securely seated.
Installation note:
Make sure rubber ring (1) is correctly seated on ultrasonic sensor (2).