25 11 071 Replacing gearshift lever knob
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.
Pull installation frame of gaiter at the sides upwards out of center console.
IMPORTANT:
Do not use a tool, as this would damage the installation frame or the center console.
NOTE:
Do not twist knob during removal as this would cause the anti-twist lock in the knob to shear off.
Tug firmly to remove button.
Installation note:
Fit knob on gearshift lever, align and press on until it snaps noticeably into place.