52 24 010 Removing and installing/replacing backrest

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove REAR SEAT
Remove HEAD RESTRAINT
Remove ARMREST

Release screws (1) on backrest.

Tightening torque 52 24 07AZ .

Release screws (2) on seatbelt anchor fitting.

Tightening torque 72 11 21AZ .

NOTE: End of work when removing side trim panel and/or storage shelf.

Fig 1: Identifying Seatbelt Anchor Screws

G10046489

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock detent lugs (1) on back and remove seatbelt outlet trim (2).

Installation note:

Replace seatbelt outlet trims in event of faulty detent lugs.

Fig 2: Identifying Seatbelt Outlet Trim And Detent Lugs

G10047643

Courtesy of BMW OF NORTH AMERICA, INC.

Feed seat belt (1) out of seat belt cover (2) and backrest (3).

Fig 3: Feeding Seat Belt Of Seat Belt Cover And Backrest

G10047644

Courtesy of BMW OF NORTH AMERICA, INC.