67 62 000 Removing and installing or replacing flat motor for front left or right power window regulator

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove front power window regulator. See 51 33 000 REMOVING AND INSTALLING (REPLACING) POWER WINDOW REGULATOR IN LEFT OR RIGHT FRONT DOOR .

Unfasten screws (2).

Tightening torque 67 62 1AZ .

Remove flat motor (1) from power window regulator.

Fig 1: Identifying Power Window Regulator Flat Motor And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Make sure drive shaft (2) is correctly seated in mounting (1) at power windows (3).

Fig 2: Identifying Drive Shaft, Mounting And Power Windows

Courtesy of BMW OF NORTH AMERICA, INC.

After installation:

An initialization must be carried out in order to activate anti-trap mechanism.

OBSERVE information on initializing power window regulator. See 67 62... NOTES ON INITIALIZING POWER WINDOWS .