67 31... Notes on initialization of electric seat actuator drives
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Initialization is carried out at the adjusting switch of the relevant seat. In this process, the end positions of the relevant electric seat actuator drive are recorded and stored.
Operating procedure for initialization:
Move corresponding seat actuator drive(s) into both end positions.
An initialization must be performed:
- After replacing a drive unit for seat adjustment.
- After replacing/programming control unit for seat adjustment.
Operating procedure for initialization:
Move corresponding seat actuator drive(s) into both end positions.