17 11... Clean the radiator ribs

Necessary preliminary tasks: 

• Remove FAN COWL .

Release screws (1) on left and right from cover (3).

Tightening torque 17 10 1AZ .

Release screws (2) behind sealing lip.

Tightening torque 17 10 1AZ .

Lift out cover (3).

Fig 1: Identifying Cover, Sealing Lip And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Check radiator (1) for dirt contamination.

Fig 2: Identifying Radiator

Courtesy of BMW OF NORTH AMERICA, INC.

To clean the radiator use a standard narrow vacuum-cleaner attachment (1) with a length of approx. 600 mm.

Fig 3: Identifying Vacuum-Cleaner Attachment

Courtesy of BMW OF NORTH AMERICA, INC.

Ensure that the cooler fins are not damaged.

Vacuum dirt off the radiator using a vacuum cleaner with a narrow attachment (1).

Fig 4: Identifying Vacuum Cleaner With Narrow Attachment

Courtesy of BMW OF NORTH AMERICA, INC.

Only if transmission oil cooler or power steering cooler fitted: 

Lift up transmission oil cooler/power steering cooler (1) slightly.

Vacuum dirt off the radiator using a vacuum cleaner with a narrow attachment (2).

Fig 5: Lifting Transmission Oil Cooler

Courtesy of BMW OF NORTH AMERICA, INC.

N63 B40/44 O 0/1 only: 

Only partially detach radiator cover (1) at top.

Using a vacuum cleaner with a narrow attachment (2), vacuum off the dirt between the air conditioning condenser and the radiator.

Fig 6: Identifying Radiator Cover With Narrow Attachment

Courtesy of BMW OF NORTH AMERICA, INC.

Reassemble the vehicle.