LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3761 (General Electrical System - Repair - F12) >> Switch >> 61 31 117 Removing and installing/replacing power window switch (driver's side)

61 31 117 Removing and installing/replacing power window switch (driver's side)

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks: 

Release power window regulator switch (1) at latch mechanisms (2) on both sides.

Pull power window regulator switch (1) out of power window regulator switch cover (3).

Installation note: 

Ensure correct latching of power window regulator switch (1) in power window regulator switch cover (3).

Fig 1: Identifying Latch Mechanisms, Power Window Regulator Switch With Cover
G10048265Courtesy of BMW OF NORTH AMERICA, INC.