61 31 084 Removing and installing/replacing switch for automatic tailgate activation

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 327

Removal:

Lever switch for automatic operation of tailgate (1) out of tailgate trim panel (2) with special tool 00 9 327 .

Fig 1: Removing Switch For Automatic Operation Of Tailgate

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock connector (1) on switch for automatic operation of tailgate (2) and disconnect.

Fig 2: Locating Automatic Operation Switch Of Tailgate

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

NOTE: Retaining clips on switch for automatic operation of tailgate (2) must not be missing or damaged.

Connect connector (1) to switch for automatic operation of tailgate (2).

Fig 3: Locating Automatic Operation Connector Of Tailgate

Courtesy of BMW OF NORTH AMERICA, INC.

Insert switch for automatic operation of tailgate (1) into tailgate trim panel (2).

Fig 4: Inserting Switch For Automatic Operation Of Tailgate Into Tailgate Trim Panel

Courtesy of BMW OF NORTH AMERICA, INC.