LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3761 (General Electrical System - Repair - F12) >> Switch >> 61 31 041 Removing and installing operating element for assist system

61 31 041 Removing and installing operating element for assist system

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required: 

IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD PROTECTION) .

Necessary preliminary tasks: 

Carefully lever driver assist system (1) out with special tool 00 9 317 .

Disconnect plug connection behind and remove driver assistance system (1).

Installation note: 

Make sure driver assistance system (1) is correctly seated.

Fig 1: Removing Driver Assistance System
G06895012Courtesy of BMW OF NORTH AMERICA, INC.