LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3761 (General Electrical System - Repair - F12) >> Plug Connection, Terminal, Power Distribution Box >> 61 13... Opening plug housings and removing contacts of different plug systems >> 61 13... Inline connectors, 15-pin, System D2.5

61 13... Inline connectors, 15-pin, System D2.5

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required: 

Carefully pull external connector (1) in area of retaining lugs (2) apart slightly.

Fig 1: Pulling External Connector
G08509669Courtesy of BMW OF NORTH AMERICA, INC.

Pull internal connector (3) until limit position in direction of arrow.

Fig 2: Pulling Internal Connector
G08509670Courtesy of BMW OF NORTH AMERICA, INC.

With special tool 61 0 303 press back retaining hook (4) of corresponding contact and pull out cable with contact.

Fig 3: Pressing Retaining Hook
G08509671Courtesy of BMW OF NORTH AMERICA, INC.