LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3761 (General Electrical System - Repair - F12) >> Plug Connection, Terminal, Power Distribution Box >> 61 13... Opening plug housings and removing contacts of different plug systems >> 61 13... In-line plugs, 6- to 50-pin, System Elo

61 13... In-line plugs, 6- to 50-pin, System Elo

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

Open lock.

Fig 1: Opening Connector Lock
G05478489Courtesy of BMW OF NORTH AMERICA, INC.

Detach cable strap.

Installation note: 

Cable strap must be reinstalled.

Fig 2: Locating Cable Strap
G05478490Courtesy of BMW OF NORTH AMERICA, INC.

Detach catch (1) from connector housing (2).

Fig 3: Detaching Catch From Connector Housing
G05478491Courtesy of BMW OF NORTH AMERICA, INC.

Press out contact carrier (3) with wiring harness (4) through opening (5).

Fig 4: Pressing Contact Carrier
G05478492Courtesy of BMW OF NORTH AMERICA, INC.

Hold down retaining hook (6) of defective contact and pull cable and contact up to secondary lock (8).

Fig 5: Pulling Secondary Lock Cable
G05478493Courtesy of BMW OF NORTH AMERICA, INC.

Hold down retaining hook once again in secondary lock (8) and pull cable and contact completely out of contact carrier.

Fig 6: Pulling Cable From Contact Carrier
G05478494Courtesy of BMW OF NORTH AMERICA, INC.