61 13... Connector housing, LCC contact (load current contact)

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

61 0 317

Socket housing:

Press lock (1) with suitable tool (2) in direction of arrow out of socket housing (3).

Fig 1: Pressing Connector Lock Using Tool

G04727532

Courtesy of BMW OF NORTH AMERICA, INC.

Pull lock (1) out of socket housing (2).

Fig 2: Pulling Lock Out Of Socket Housing

G04727533

Courtesy of BMW OF NORTH AMERICA, INC.

Insert special tool 61 0 317 into socket housing (1) and pull out wiring with LCC contact (2) in direction of arrow.

Fig 3: Inserting Special Tool 61 0 317 Into Socket Housing

G10048022

Courtesy of BMW OF NORTH AMERICA, INC.

Pin housing:

Unlock locking slide (1) of pin housing (2) with suitable tool (3) in direction of arrow.

Fig 4: Removing Pin Housing Using Suitable Tool

G04727535

Courtesy of BMW OF NORTH AMERICA, INC.

Insert special tool 61 0 317 into pin housing (1) and pull out wiring with LCC contact (2) in direction of arrow.

Fig 5: Inserting Special Tool (61 0 317) Into Pin Housing

G04727536

Courtesy of BMW OF NORTH AMERICA, INC.