LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3761 (General Electrical System - Repair - F12) >> Headlight Cleaning System, Washer Jets Night Vision >> 61 67 200 Removing and installing/replacing washer jet for Night Vision camera

61 67 200 Removing and installing/replacing washer jet for Night Vision camera

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks: 

Release screws (1).

Remove high-pressure nozzle (2) from Night Vision camera (3).

Installation note: 

New washer jet is already preset.

Run a function check.

Fig 1: Identifying High-Pressure Nozzle, Night Vision Camera, Screws
G06895149Courtesy of BMW OF NORTH AMERICA, INC.